Updated November 2026

Christmas ornaments from photographs are one of the easiest ways to turn family pictures into keepsakes you can hang every year. With the right image, a few basic supplies and a simple sealing step, you can make ornaments that look sharp, hold up to handling and last for many seasons. This guide covers how to choose the photo, prepare it, and assemble and display the finished piece.

Choose and Prepare the Right Photo

Start with a photo that has a clear subject, good focus and enough resolution to print at ornament size. A round ornament about 3 inches across needs roughly 900 by 900 pixels to print crisply. Crop tightly around faces or the main subject, since small details disappear once the image is reduced. Avoid heavy shadows across faces and busy backgrounds that will compete with the subject.

Shopping for one? See our guide: 5 Best Christmas Ornaments Blown Glass for Every Tree Style (2026).

Adjust brightness and contrast in a basic photo editor before printing. Printed colors usually look darker and less saturated than they appear on screen, so brighten the image slightly and boost contrast a little more than you think you need.

Pick Your Ornament Format

Photo ornaments come in several formats, and the right one depends on how you plan to hang them and how durable you want them to be. Glass or acrylic blanks with an insert accept a printed photo sealed behind a clear dome. Wood or MDF discs take printed images well and are sturdy enough for children’s hands. Clear plastic shells that open and close let you swap photos later.

Consider your tree as well. Heavy glass blanks suit a sturdy tree with strong branches, while lightweight acrylic or wood works better on artificial trees with thinner limbs.

Print on photo paper or a specialty decal sheet made for your ornament material. Trim the image to the exact size of the blank, leaving a small margin so no white edge shows. For glass or clear domes, print the image mirror-reversed if the photo will be viewed through the front, so the text and faces read correctly from the outside.

Apply a clear sealant or lacquer spray in thin, even coats to protect the print from moisture and fingerprints. Allow each coat to dry fully before adding the next. Once sealed, fit the image into the blank, secure the back and attach a hanging loop or ribbon.

  1. Select a high-resolution photo and crop it to the ornament shape.
  2. Adjust brightness and contrast, then print at actual size on suitable paper or decal sheet.
  3. Trim with a small margin and check the fit inside the blank.
  4. Spray two to three thin coats of clear sealant and let each dry completely.
  5. Insert the photo, secure the back and add a ribbon or wire hanger.

Display and Care for Photo Ornaments

Hang photo ornaments on the middle and upper branches, away from direct heat sources like fireplaces and string lights that can warm the surface. Keep them out of direct sunlight in the months before the holidays, since UV exposure fades ink over time. Store them in padded boxes with the photo side up so the surface does not scratch.

If you want a mix of photo ornaments with other designs, pair them with coordinating pieces. Our guide to Homemade Christmas Ornaments to Make: 8 Easy Projects for Your Tree offers ideas that combine well with custom photo pieces, and Shutterfly Personalized Christmas Ornaments: A Practical Guide (2026) covers a ready-made option if you would rather skip the printing step.

A fine-tipped clear acrylic sealant helps protect printed images from moisture and handling without yellowing over time. Search for it here: View on Amazon.

Blank ornament discs or clear ornament shells in your chosen size give you a consistent base for printed photos. Browse options here: View on Amazon.

Photo paper or printable decal sheets sized for ornaments make it easier to get sharp color and clean edges. Find them here: View on Amazon.

Common Mistakes to Avoid

  • Using a low-resolution screenshot or social media image that prints blurry at ornament size.
  • Skipping the sealant, which leaves the print vulnerable to moisture and fingerprints.
  • Printing without test-fitting the image inside the blank first.
  • Forgetting to mirror the image when a clear dome will be viewed from the front.
  • Hanging finished ornaments near heat sources or in direct sunlight, which can fade the print.

FAQ

What size photo works best for an ornament?

Crop the photo to the exact shape of your blank, usually round or square. Aim for at least 900 pixels on the shortest side for a 3-inch ornament so the print stays sharp.

Can I use a regular inkjet printer?

Yes, as long as you use photo paper or a decal sheet compatible with your printer. Let the print dry fully before sealing it to avoid smudging.

How long do photo ornaments last?

Properly sealed prints kept out of direct sunlight and heat can last many years. Store them in padded boxes between seasons and avoid stacking heavy items on top.

Conclusion

Christmas ornaments from photographs are a practical way to preserve favorite memories on your tree. Choose a sharp, well-cropped image, seal it carefully and display it away from heat and sun. With a little preparation, each ornament can become a keepsake you look forward to unpacking every year.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our christmas decorating guides, checking product details against manufacturer specifications and owner feedback.