Updated November 2026

Templates of Christmas ornaments give you a repeatable shape to trace, cut, and decorate, so every piece matches and your tree looks planned rather than random. This guide walks through choosing a template, transferring it to your material, and sizing it for your tree. By the end, you will have a set of reusable patterns you can use for any ornament project.

Choose the Right Template for Your Material

Not every template works with every material. Stiff card stock holds a stencil shape well for painting or glitter, while thin paper tears at small details. Felt and foam accept sharp, fine cuts, and salt dough benefits from simple, chunky outlines that will not crack during drying.

Before you print or draw anything, decide what you will make. Star, bell, and snowflake shapes are the most forgiving for beginners. If you are new to pattern work, start with a shape that has few sharp inner corners, since those are where cuts usually fail.

Size the Template for Your Tree

Scale matters more than most people expect. On a standard 6-foot tree, ornaments between 2 and 4 inches across read clearly from a normal viewing distance. Larger tree-top or statement pieces can run 6 to 8 inches, but anything bigger tends to look heavy on thin branches.

Print a test copy at 100 percent scale and measure the actual dimensions with a ruler. If you plan to make a full set, keep one master size for consistency and note the dimensions on the template file itself.

Transfer and Cut the Template

  1. Print the template on plain paper and check the measurements.
  2. Trace it onto your material with a fine-tip pen or pencil, or glue it on and cut around the edge.
  3. Cut slowly with sharp scissors or a craft knife on a cutting mat.
  4. Punch a hanging hole at the top before any decorating, since it is harder to place once paint or glitter is on.
  5. Test one piece fully before cutting the whole batch.

For stencils, cut the template from a stiff sheet and tape it down so it cannot shift. For repeated shapes on felt or foam, a single paper template traced many times is faster than cutting each piece by eye.

Mark Hanging Points and Layers

If your design has layers, mark where each piece will sit before gluing. A consistent placement guide keeps all ornaments in the same set looking uniform. Draw a faint centerline on the template and align each layer to it.

Decorate and Finish Consistently

Use the same paint, glitter, or fabric across a set. Let each layer dry fully before adding the next, and seal finished pieces with a clear coat when the material calls for it. Consistent finishing is what makes homemade ornaments look like a coordinated collection.

Common Mistakes

  • Printing at “fit to page,” which silently shrinks or enlarges the template.
  • Cutting the entire batch before testing one piece.
  • Forgetting the hanging hole until after decorating.
  • Using a thin paper template for sturdy material, which warps and tears.
  • Mixing sizes in one set without noting which template each piece came from.
  • A self-healing cutting mat protects your table and keeps blade cuts clean, which matters for small curves. View on Amazon
  • A fine-tip craft knife gives you control on tight inner corners that scissors can miss. View on Amazon
  • A hole punch set for card and felt makes consistent hanging holes quick across a large batch. View on Amazon

If you want more shape ideas to test first, see 8 Best Christmas Tree Ornaments Templates for DIY Crafts (2026) for ready-made patterns. For inspiration on finished looks, Homemade Christmas Ornaments to Make: 8 Easy Projects for Your Tree covers projects that pair well with a template approach, and Ideas for Christmas Ornaments: 12 Creative Themes and Styles for Your Tree helps you plan a cohesive color scheme.

FAQ

Where can I find templates for Christmas ornaments?

You can draw your own on paper using simple geometric shapes, or print patterns from craft sites and craft books. Many pattern sets are available as printable PDFs, so check that the file states its print scale.

What is the best material for a first template project?

Stiff card stock or thick felt is the easiest starting point. Both hold their shape, cut cleanly, and forgive small mistakes.

How do I keep a template from shifting while I trace it?

Tape the template at two or more corners before tracing. For repeated shapes, a small dab of removable adhesive on the back keeps it still.

Conclusion

Good templates of Christmas ornaments make the whole project faster and more consistent. Pick a shape suited to your material, check the scale before cutting, and finish each piece the same way. With a few reusable patterns, you can build a full tree set that looks intentional from top to bottom.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our christmas decorating guides, checking product details against manufacturer specifications and owner feedback.