Updated November 2026

An artificial Christmas tree from IKEA can be a practical, long-lasting choice if you know what to look for. This guide walks you through checking the tree’s size and branch structure, setting it up so it looks full, and avoiding the mistakes that make store-bought trees look thin or flat. By the end, you will know how to pick the right model for your room and get it ready for the holidays.

Step 1: Measure Your Space Before You Shop

Start with the room, not the tree. Measure the height from the floor to the spot where the top of the tree will sit, leaving at least 6 inches of clearance below the ceiling or any light fixture. Then measure the width of the corner or spot you have available. A tree whose base spreads 48 inches will crowd a space that is only 40 inches wide, so match the tree’s spread to the floor area, not just its height.

Shopping for one? See our guide: 5 Best Pre Lit Christmas Tree Artificial Picks for Every Home (2026).

Step 2: Compare Branch Types and Tip Styles

IKEA’s artificial trees come in several branch styles, and the difference affects how realistic the tree looks up close. Tips described as “PVC” are firmer and hold their shape well but look more like plastic. Tips described as “PE” or “soft-touch” have a more natural, dimensional feel. Many owners report that a mix of both, with denser branches toward the bottom, gives the best balance between looks and durability.

If lifelike appearance is your main goal, our guide on What Is the Most Realistic Artificial Christmas Tree? How to Choose One (2026) explains how to judge branch density in more detail.

Step 3: Assemble and Fluff the Tree

Most IKEA trees arrive in sections that snap or screw together. Build the trunk first, then attach branch sections from the bottom up. Set each row of branches so the tips point slightly upward. Once assembled, spend about 20 to 30 minutes bending each branch outward and separating the tips. Work from the top down so you do not miss the middle and lower sections, which hold most of the visible volume.

If the tree still looks sparse after fluffing, our article How to Make Artificial Christmas Tree Look Fuller: 7 Easy Steps That Work covers techniques for filling gaps.

Step 4: Light and Decorate with Even Spacing

Use a light set rated for indoor trees and plug it into a surge protector. For a standard 7 to 7.5 foot tree, many decorators use roughly 500 to 900 lights, depending on how dense the branches are. Wrap lights from the trunk outward, moving tip to tip rather than wrapping each branch separately. Hang ornaments in three zones: large pieces deep inside the tree, medium pieces in the middle, and small or lightweight pieces near the tips.

Step 5: Use a Stand That Supports the Weight

The base stand matters more than many people expect. A tree that wobbles will look crooked no matter how well it is decorated. Check that the stand is level on your floor, and tighten all base screws before adding branches. For taller trees, a wide, weighted base is safer for households with pets or children.

Common Mistakes to Avoid

  • Skipping the fluffing step, which leaves the tree looking flat and sparse.
  • Choosing a tree that is too tall for the ceiling clearance you measured.
  • Stringing all the lights from one outlet without checking the load rating of your extension cord.
  • Hanging heavy ornaments on the tips, which can bend branches out of shape.
  • Storing the tree loose in a damp or crushed box, which causes bent branches and dust buildup.

A sturdy tree stand or base plate helps keep a tall artificial tree upright, especially with heavy light sets. View on Amazon

A pre-lit light set with a clear timer makes it easier to get even coverage without untangling strands. View on Amazon

A tree storage bag with handles protects branches and makes next year’s setup faster. View on Amazon

FAQ

Are IKEA artificial Christmas trees good quality?

Quality varies by model, so check the branch material and stand description before buying. Owners often report that trees with mixed PVC and PE tips look fuller and last longer than those with only one tip type.

How long does it take to set up an IKEA artificial tree?

Assembly usually takes under an hour for a standard-sized tree. Fluffing the branches can add another 20 to 30 minutes, and lighting and decorating will take longer depending on your style.

How do I store an artificial tree from IKEA?

Keep the branches clean and dry, then store the tree in its original box or a breathable storage bag. Avoid squeezing branches tightly, since that can bend the tips and reduce fullness the next season.

Conclusion

Choosing an artificial Christmas tree from IKEA comes down to measuring your space, comparing branch styles, and setting the tree up carefully. Fluff the branches, light evenly, and use a stable stand, and your tree will look full and natural. For questions about electrical safety or lighting, consult a qualified electrician.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our christmas decorating guides, checking product details against manufacturer specifications and owner feedback.